The in-depth proposals of our Academy continue. Today we present a new webinar scheduled for 6 and 7 May: focus on petrol and diesel engines. Alientech Academy doesn’t stop and continues to work to give you the best in every situation.
alientech academy webinar may 6 and 7, 2020! Focus on petrol and diesel engines!
BECOME A CHIPTUNING PRO WITH US!
choose alientech academy webinar!
CONTACT US!Two days of advanced courses, where you’ll see in detail all that you need to know about modern gasoline and diesel engines; theoretical elements as well as many practical examples of mapping.
Invest now in your training!
It is the right time
CONTACT US!Alientech’s experience in training has made it possible to improve the offer even more, trying to build complete sessions both from a theoretical and practical point of view. In particular, the practical aspect has increasingly become the focus of our training days.
Just like in the classroom, without leaving your home.
We will come to you!
CONTACT US!We offer you exactly what you would have in the classroom, in our academy or in our training centers around the world. Same concepts, same examples, same trainers. The difference is only one: we will come to you and not you to us!
Do you want more information? Write us!
WEBINAR TRAINING PROGRAM
May, 6 – focus on petrol engines
This webinar course will allow you to deepen even more your skills regarding tuning of petrol engine control units. You will understand how to identify the maximum achievable goal and what specific procedures was applied to some selected examples. Moreover, how to use the ECM Titanium software for file comparing.
The event is structured in four time-units of 1h30’ each. After each unit, there is a 15’ period for questions and answers. There are two short breaks and a long one.
Remember: time zone UTC+1
May, 7 – focus on diesel engines
This webinar course will allow you to deepen even more your skills regarding tuning of Diesel engine control units. You will understand how to identify the maximum achievable goal and what specific procedures was applied to some selected examples. Moreover, how to use the ECM Titanium software for file comparing.
The event is structured in four time-units of 1h30’ each. After each unit, there is a 15’ period for questions and answers. There are two short breaks and a long one.
Remember: time zone UTC+1
May, 6 - focus on petrol engines
- 09.00: Course starts
- 09.15 to 10.45: Advanced management for new generation of ECUs based on torque calculation
- 10.45 to 11.00 : Question time
- 11.00 to 11.15 : Short break
- 11.15 to 12.45: Calculation of the maximum increment possible on stock engines using maps inside the stock file
- 12:45 to 13:00 : Question time
- 13:00 to 14:00 : Long break
- 14:00 to 15:30 : Practical example using maximum tuning level on last generation ECU Bosch MED17
- 15:30 to 15:45 : Question time
- 15:45 to 16:00 : Short break
- 16:00 to 17:30 : Comparing two stock original files with different power level for a Continental ECU and dyno graphs for torque and power, for analysing original and modified file performance
- 17:30 to 17:45 : Question time
May, 7 - focus on diesel engines
- 09.00: Course starts
- 09.15 to 10.45: Advanced management for new generation of ECUs based on torque calculation
- 10.45 to 11.00 : Question time
- 11.00 to 11.15 : Short break
- 11.15 to 12.45 : Calculation of the maximum increment possible on stock engines using maps inside the stock file
- 12:45 to 13:00 : Question time
- 13:00 to 14:00 : Long break
- 14:00 to 15:30 : Practical example using maximum tuning level on last generation ECU Bosch EDC17
- 15:30 to 15:45 : Question time
- 15:45 to 16:00 : Short break
- 16:00 to 17:30 : Comparing two stock original files with different power level for a Delphi ECU and dyno graphs for torque and power, for analysing original and modified file performance
- 17:30 to 17:45 : Question time
this webinar will be held in english
TIME LEFT